
Gunpla Grades Explained: HG vs RG vs MG vs PG for Beginners
HG, RG, MG, PG, EG, SD: Gunpla grades are a ladder, not a menu. What each one means, what it costs in time, and which kit to buy first if you've never built one.
Walk into a Japanese hobby shop and the Gundam model wall is several metres of near-identical boxes, each stamped with two letters: HG, RG, MG, PG, EG, SD. Those letters are Gunpla grades, and they tell you almost everything about what is inside — the scale, the detail, the difficulty and how many evenings you are about to give up.
This guide explains each Gunpla grade, compares them side by side, covers the tools you actually need, and ends with a straight answer to the question every beginner asks: which kit should I buy first?
What is Gunpla?
Gunpla (ガンプラ) is short for Gundam plastic model — kits based on the robots, or mobile suits, of the Mobile Suit Gundam anime that began in 1979. The first kit, a 1/144 RX-78-2 Gundam, came out in 1980 and sold for a few hundred yen. More than four decades later, Gunpla is one of Japan's biggest hobby exports.
The kits are made by Bandai Spirits, and production happens at Bandai's Hobby Center in Shizuoka, the long-standing centre of Japan's plastic model industry. Almost every modern kit is snap-fit: parts are moulded in colour and press together without glue or paint. You can build a good-looking model with no painting at all.
Gunpla grades at a glance
| Grade | Scale | Since | Difficulty | Rough build time | Best for |
|---|---|---|---|---|---|
| Entry Grade (EG) | 1/144 | 2020 | Very easy | Under two hours | Total beginners, children with help |
| High Grade (HG) | 1/144 | 1990 | Easy | A few hours | First kits; the biggest range |
| Real Grade (RG) | 1/144 | 2010 | Moderate to fiddly | Several evenings | Detail lovers with patient fingers |
| Master Grade (MG) | 1/100 | 1995 | Moderate | A weekend or more | The enthusiast's standard |
| Perfect Grade (PG) | 1/60 | 1998 | Advanced | Many sessions | Centrepiece builds |
| PG Unleashed | 1/60 | 2020 | Advanced | Much longer | The most detailed Gunpla made |
| SD / MGSD | Super-deformed | — | Easy to moderate | A few hours | Cute, chunky display pieces |
Build times are rough and vary enormously with how carefully you trim and finish parts.
Every Gunpla grade explained
Entry Grade and High Grade: where to start
Entry Grade kits were designed so that anyone can build them without tools: parts twist off the runner cleanly. They are simplified, but they look good and are the gentlest possible introduction.
High Grade is the heart of Gunpla. The range is huge, the kits are affordable, and a modern HG has decent articulation and colour separation. Most builders build dozens. If you only ever build HGs, you are still a Gunpla builder.

Bandai
Bandai HGUC 1/144 RX-78-2 Gundam
A 1/144 scale assembly plastic model of the main mobile suit from Mobile Suit Gundam, part of the HGUC series. With refined proportions and a wide range of articulation, you can beautifully recreate dynamic poses from the series. Iconic weapons such as the beam rifle, beam saber, and shield are also included.
From 31 USD
Real Grade: detail at small scale
Real Grade puts Master Grade-level detail into a 1/144 kit. Many RGs have an inner frame — a skeleton under the armour — and an extraordinary number of small parts and stickers. The result looks impressive on a shelf and can be fragile in the hand.
RG is rewarding but not a first kit. The small parts are easy to lose, and the build can feel more like jewellery than modelling.

Bandai
Bandai RG 1/144 v Gundam
A 1/144 scale RG (Real Grade) plastic model of Amuro Ray's mobile suit from "Mobile Suit Gundam: Char's Counterattack." With its precise part construction and unique armor-sliding gimmicks, it naturally reproduces dynamic poses from the movie. Includes various characteristic weapons such as the Fin Funnels.
From 78 USD

Bandai
Bandai RG 1/144 Sazabi
The "RG Sazabi" features some of the most extensive gimmicks in 1/144 scale history. Arm cylinders, funnels, and other weaponry are faithfully reproduced. With a variety of hand parts and a wide range of articulation, you can easily recreate dynamic poses from the series.
From 84 USD
For reference, list prices in Japan for popular RGs sit in the few-thousand-yen range: the RG Hi-ν Gundam is listed at ¥4,950.
Master Grade: the enthusiast's middle
Master Grade is the grade many builders consider the sweet spot. At 1/100 the parts are larger and easier to handle, most kits have a full inner frame, and the finished model is substantial. "Ver.Ka" kits are based on designs by the mechanical designer Hajime Katoki and are especially sought after.
The MG Sazabi Ver.Ka, a famously imposing kit, is listed at ¥10,340 in Japan.
Perfect Grade and PG Unleashed
Perfect Grade kits are 1/60 — large, heavy, and engineered to an extraordinary standard, often with features like lighting compatibility and opening hatches. PG Unleashed, launched in 2020 with the RX-78-2, pushed further still, with a staged build that assembles the frame, then layers the armour, much as a real machine might be built.
The PG Unleashed RX-78-2 is listed at ¥27,500 in Japan. It is a project, not an evening.
SD and MGSD: the chibi grades
Super-deformed kits shrink the robots into chunky, big-headed versions. Classic SD kits are quick and fun. MGSD applies Master Grade engineering to the SD style, with an inner frame and real articulation, making it a popular choice for builders who want detail without a large shelf footprint.
The tools you actually need
- Single-blade side cutters (nippers). The one essential. They cut parts off the runner cleanly, leaving less white stress mark.
- A hobby knife. For trimming the small nub left where the part met the runner.
- Sanding sticks. Fine grits to smooth nubs flush.
- A panel-lining marker. A fine pen run along the moulded lines adds instant depth.
- Tweezers. For placing stickers and decals.
Paint, airbrushes and top coats are optional extras for later.
Which Gunpla should you buy first?
Buy a High Grade of a design you love. Liking the robot matters more than the grade, because enthusiasm carries you through the build. If you are buying for a child, or are nervous about cutting, start with an Entry Grade. Move to Master Grade once you have finished two or three HGs and want more. Save Real Grade and Perfect Grade for when you know you enjoy the process.
Browse our anime and character section for kits sourced from Japan, and read why Japan-made matters for the wider case for buying from the source.
Frequently asked questions
What is the difference between HG, RG and MG? HG and RG are both 1/144; RG adds much more detail and many more parts. MG is larger, at 1/100, with an inner frame and more articulation.
Do you need glue or paint to build Gunpla? No. Modern kits are snap-fit and moulded in colour. Paint is optional.
What is the easiest Gunpla? Entry Grade kits, which can be built by hand without tools.
Is Real Grade good for beginners? It can be done, but the small parts and stickers make it frustrating as a first kit. Start with HG.
How long does a Master Grade take to build? Roughly a weekend or more, depending on the kit and how carefully you trim parts.
If you have enjoyed this, our guide to what Chiikawa is covers another Japanese obsession. And for a lucky charm to watch over your desk while you build, see daruma and maneki-neko.